Sözce'de sorgulama yapmak için bir kelime girin

locknut ne demek?

- 1 sözlük, 1 sonuç.

İngilizce - Türkçe

locknut anlamı
isim
1) kilit somunu

"locknut" için örnek kullanımlar

A locknut, also known as a lock nut, locking nut, prevailing torque nut stiff nut or elastic stop nut is a nut that resists loosening
Kaynak: Locknut

A split beam nut, also known as a split hex nut or slotted beam nut, is a locknut with slots cut in the top that separate the outside end
Kaynak: Split beam nut

Locknuts: Locknut. Castellated nut Distorted thread locknut Centerlock nut. Elliptical offset locknut. Toplock nut. Interfering thread nut
Kaynak: Nut (hardware)

An interfering thread nut is a type of locknut that has an oversized root diameter. This creates an interference between the nut and the
Kaynak: Interfering thread nut

A jet nut also known as a K-nut is a special type of hex locknut that is commonly used in the aerospace and automotive racing industries
Kaynak: Jet nut

A serrated face nut is a locknut with ridges on the face of the nut that bite into the surface it is tightened against. The serrations
Kaynak: Serrated face nut

A speed nut, also known as a sheet metal nut, is a type of locknut with two sheet metal prongs that act as one thread . They are made
Kaynak: Speed nut

It is commonly used as a type of locknut , where it is "jammed" up against a standard nut to lock the two in place. It is also used in
Kaynak: Jam nut

(pictured as "lower head-tube race"), upper frame cup (pictured as "upper head-tube race"), upper bearings, upper race or cone, washer, locknut.
Kaynak: Headset (bicycle part)

Lock washer s, locknut s, and safety wire s may be used in conjunction with thread-locking fluid to prevent loosening of bolts.: |
Kaynak: Thread-locking fluid

Adjustment: The adjusting screw was locked by a locknut. If the screw became loose, the adjustment would also work loose. tappet locknut even
Kaynak: Tappet

"The right-wing taper bolt did not penetrate deep enough through the spars to engage the fibre locking feature of the locknut.
Kaynak: Scott Manning

JPG | A bicycle head tube with a partially installed bicycle headset; the locknut has yet to be fitted onto the fork steer tube.
Kaynak: Head tube

Valve lash was adjusted by a simple set screw-and-locknut arrangement, and timing was taken care of by adjustment of the points' housing.
Kaynak: BMW R65

The barrel is threaded into the receiver and fixed via a large locknut located just ahead of the receiver, with a recoil lug sandwiched
Kaynak: Savage Model 110

Yakın Kelimeler

Google Reklamları

(Tahmin etmek için bir harf girin)